Aeration Manager · Control

Cool it. Preserve it. Protect it.

Intelligent control for grain and seed aeration — fans run only when outside conditions help, from your phone or desktop. Retrofitted to your existing switchboard, or in a custom control cabinet we build for your site.

Fan running
Aeration Manager dashboard for a 24-fan site: live weather and 7-day forecast, fans running, stopped and in fault, runtime today, this week and this month, and each silo's fan mode
The problem

Harvest heat doesn't disappear on its own

Grain or seed harvested in hot conditions carries field heat into storage. Removing it quickly — and then only aerating on the right air — helps reduce the conditions behind moisture migration, sweating, mould and storage deterioration.

  1. Hot harvest

    Seed enters storage carrying the day's field heat.

  2. Forced Run

    The fan moves ambient air through the grain mass.

  3. Heat removed

    The grain is brought toward outside temperature.

  4. Safer storage

    Grain enters long-term storage in better condition.

Four fan modes

One controller, four ways to manage aeration

Each mode suits a different stage of storage — from the day grain enters the silo to months of long-term storage.

Forced Run

1–24 h · conditions disregarded

When hot grain or seed comes in from the paddock, Forced Run runs the fan straight away — 10 hours by default, or 1 to 24 hours as you choose — to push field heat out before long-term storage. Then it hands over to Automatic.

Automatic

Condition-based

Runs the fan only when outside temperature and humidity are within the limits you set for the season, so humid air isn't pushed into the grain.

Auto Protect

Low-intensity maintenance

For long-term storage: short 30-minute runs with an hour's rest, aiming for about 3¼ hours a day — and only when outside air is suitable.

Off & manual

Your call, any time

Turn any fan on or off yourself, or switch a silo to Off so nothing runs until an operator says so. Automatic when you want it, manual when you need it.

Winter and summer limits you set

For every silo, set the winter dates and, for winter and summer, a minimum and maximum outside temperature and humidity. Automatic and Auto Protect only run the fan when the air is within those limits — and the dashboard tells you which limit is holding a fan off.

Retrofit

Designed for existing systems

Add smart control without replacing your electrical infrastructure: existing silo → existing fan → existing switchboard → SiloSense controller → cloud → phone and desktop.

Traditional upgrade

  • New wiring and cabling throughout the site
  • Switchboard modifications and electrician time
  • Extended installation downtime
  • Higher upfront capital cost

SiloSense retrofit

  • Works with your existing silo, fan and switchboard
  • Controller added to your existing setup
  • Remote control from day one
  • Smart control added, infrastructure kept
Three SiloSense IQ smart aeration controllers mounted in a site switchboard, wired to the existing fan circuits
In the switchboard

Fitted alongside the starters you already have

SiloSense IQ smart aeration controllers mount on the DIN rail of an existing switchboard and switch the fans through their current starters.

  • Up to 8 fans per controller
  • Existing starters kept
  • Manual override stays

Designed to minimise electrical modifications, subject to site requirements. Every installation is assessed against the existing setup before work begins.

Custom aeration control cabinets

No suitable switchboard? We'll build one for your site.

We design and build custom aeration control cabinets for grain and seed storage sites anywhere in Australia — from a single silo to a full site of fans. Each cabinet is built around your fans and power supply, with the SiloSense controller built in, so it's ready for remote control the day it's switched on.

  • Designed for your site — any number of fans, any location in Australia
  • Fan starters or variable speed drives (VSDs) for soft starts and speed control
  • Isolation and protection for every fan
  • SiloSense controller and connectivity built in
  • Installed and connected by a licensed electrician
Connectivity

Connected wherever your silos are

Cellular

4G/5G for sites with mobile coverage — quick to set up, no fixed line needed.

Ethernet

A direct wired connection where the site already has networking — the most stable link.

Wi-Fi

Uses the local network at sites and sheds already running their own wireless.

Starlink

Satellite for remote and off-grid sites with no cellular or fixed-line access.

Whatever the site, whatever the coverage — if you can put a silo there, we can connect it.

Energy efficiency

Don't just run the fan. Know when to run it.

Running regardless of the weather

The fan runs whatever the outside air is doing — humid air goes into the grain and power is spent for nothing.

With SiloSense

Outside conditions are checked first. Favourable: the fan runs. Not favourable: it waits. Better timing, controlled runtime and potential energy savings.

Go further

See inside the silo, or automate it completely

Monitor

SiloSense IQ

See inside every silo, in real time. Temperature, humidity and CO₂ monitoring that flags spoilage, bacterial and mould risk early.

  • Real-time temp, humidity & CO₂
  • Early spoilage, bacterial & mould alarms
  • Grain moisture for 12+ commodities
Monitor + Automate

SiloSense IQ+

Fully self-sufficient silo intelligence. Live in-silo readings decide when the fans run — closing the loop between sensing and action.

  • Automatic aeration from in-silo data
  • Set-point drying to your target moisture
  • Moisture guard — never re-wets grain

Your silos are working. Now make them think.

Bring intelligent aeration control to your existing fans — or let us build a control cabinet for your site.